Regulated WS2811 RGB Pixel String 12mm

SKU: 10235

Category: LED Pixel chains

Regulated WS2811 RGB pixels
Consistent brightness across the entire pixel string

For MegaTrees & long pixel runs
Ideal for large DIY Christmas displays

12 V system · Outdoor
Robust 12 mm pixels, IP68 rated for outdoor use

from

12,99 €

incl. 19% VAT , plus

Choose tax zone / country of delivery

Available immediately

string

This item has variations. Please select the requested variation.

Available immediately

Description

Regulated WS2811 RGB Pixel String (12 V) – 12 mm Bullet Pixels, 4 inch Spacing, Outdoor

This addressable WS2811 pixel string is designed for 12 V setups and is commonly used for DIY holiday lighting, house and garden installs, and larger pixel projects. The focus is a more uniform appearance over longer runs – especially when power injection is not available at every point and you want the installation to look clean and consistent.

What does “regulated” mean for WS2811 pixels?

“Regulated” means the power is stabilized inside each pixel. In practice, this results in a more consistent appearance over longer pixel runs compared to classic resistor-based pixels. This is especially relevant for house outlines, MegaTrees, and long linear runs where visible differences can otherwise appear towards the end of a string.

Typical use cases

Common applications include rooflines, window frames, garden arches, figures/props, and MegaTrees. For highly visible outlines, a calm and consistent overall look matters.

MegaTree long runs, consistent overall look

House outline roofline, windows, frames

Garden & props arches, figures, mini trees

Understanding voltage drop

Over long cable runs, voltage can drop towards the end. Regulated pixels keep the output stable over a wider range, but they may shut off if the input voltage becomes too low. For larger installs, planned power injection (e.g., at multiple points) is recommended to ensure reliability.

Controller, connector & variants

This pixel string is intended for WS2811 controllers in 12 V setups. The connector is selected as a variant so the string matches your controller/extension system. (Example: JST or xConnect®.)

Variants – how to choose

First select the pixel count (e.g., 50 or 100), then choose the matching connector. Standard spacing is 4 inch (≈ 10 cm).

Pixel count: via variant
Connector: via variant
Custom lengths: on request

Outdoor – correctly categorized

The pixel string is outdoor suitable (IP68). The outdoor suitability of the entire system also depends on the connector: xConnect® is outdoor suitable; other connector types may require protection/sealing depending on the setup.

Note: Technical details such as wire gauge (e.g., 18 AWG / 0.75 mm²) are listed under “Features”.

FAQ

What is the standard configuration?

Standard pixel spacing is 4 inch (≈ 10 cm). Pixel count and connector are selected via variants.

What is the benefit of regulated pixels?

In practice, the appearance stays more consistent over longer runs because power is stabilized inside each pixel.

Are the pixels and connectors outdoor suitable?

The pixel string is IP68. For a fully weather-resistant setup, the connector also matters: xConnect® is outdoor suitable; other connector types may require protection/sealing depending on the setup.

Characteristics

Item information	Value
Controller IC:	WS2811
Pixel Diameter:	12 mm
WEEE-Reg.-Nr.:	DE 32487762
Cable color:	black
Pixel spacing:	4 inch (≈ 10 cm)
Operating Voltage:	12 Volt DC
Connector System:	xConnect®
Voltage management:	regulated
Ingress Protection:	IP68
Wire gauge:	18 AWG – 0,75 mm²
Shipping weight:	0,90 kg

Product safety information

Manufacturer information:

PIXLtec GmbH
Maybachstraße 8
Baden-Württemberg
Karlsruhe, Deutschland, 76227
info@pixltec.de